Victron Energy with the new Quattro 48V 10kVA inverter / charger units and 12 Year Design life Gel Batteries with 600 cycles at 50% Depth of Discharge
The Quattro 10000 is a combined inverter/charger with two AC inputs. One for mains and one for a generator. Or in the case of two generators: one for each generator. A transfer switch between two AC sources is therefore not needed. This integrated system is what makes the Quattro so unique, just like the earlier models, the Quattro 3kVA, 5kVA and 8kVA. In comparison with a conventional system, many devices are integrated into one.
Two AC Outputs
The main output has no-break functionality. In the event of a grid failure, or shore or generator power being disconnected, the Quattro takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, such as air-conditioning or a water heater can be connected to this output.
PowerAssist: boosting power
Just like the Victron Multi family, the Quattro is equipped with PowerAssist. Where peak power is so often required only for a limited period, the Quattro will make sure that insufficient mains or generator power is immediately compensated by power from the battery. When the load reduces, the spare power is used to recharge the battery.
Parallel or three phase capability
Up to ten Quattro units can operate in parallel. Also up to 10 sets of three units can be parallel connected. This means that there are many different ways to design a system.
System configuring has never been easier
After installation, the Quattro is ready to go. If settings have to be changed, this can be done in a matter of minutes with new built-in DIP switches. Alternatively, VE.Net can be used instead of the DIP switches. Victron has also developed sophisticated software, which is available to configure new and advanced features.
Unlimited energy with Victron Energy
Victron Energy is a leading supplier of autonomous ‘off-grid’ installations for the Marine, Industry, Automotive,
Off-grid and Mobility markets. Products include sine wave inverter/chargers, battery chargers, DC/DC converters, transfer switches, battery monitors, Victron Global Remote, BlueSolar Panels and more. Victron Energy has a strong, unrivalled reputation for technical innovation, reliability and build quality. The products are widely considered to be the professional choice for independent electric power.
12 Year Design Life Gel Batteries and 10 Year Design Life AGM Batteries VRLA AGM: design life 7-10 years
VRLA GEL: design life 12 years
VRLA GEL 2 Volt cells: design life 20 years
The AGM range has very low internal resistance making them particulary suitable for high current discharge applications such as for inverters, thrusters and winches as well as engine starting.
The GEL model range offer best deep cycle durability and overall longer life.
The use of high purity materials and lead calcium grids ensure that for both AGM and GEL products have particulary low self discharge so that they will not go flat during long periods without charge.
Both ranges are supplied with M8 drilled, flat copper terminals ensuring best possible connection contact and eliminating the need for battery terminals. Manufactured under ISO 9001 quality standards, they are compliant with both CE and UL specifications in ABS fileproof containers and come with Victron’s 2 year world-wide warranty.
