Wind power asset management

Wind operators must squeeze out every watt they can when the wind is blowing. To do so, wind projects must be reliable and maintained with minimum cost. With variable winds, high costs, and slim margins, everything has to work right to make sure that wind is attractive alternative power and a sound economic investment. So if a turbine is to work 20 years or more before retiring, it better be properly designed and maintained.

Standard procedures: not working

Most wind turbines are maintained by a combination of traditional schedule-based preventive maintenance and threshold-based alarm systems. A problem with scheduled maintenance is that the standard six-month interval between inspections may be too long to detect an emerging problem. And fixed-threshold alerts, typically set by OEMs, activate too late to support proactive maintenance. That’s because the alerts are intended to protect equipment from catastrophic damage and can’t take into account a wide range of normal wind-turbine operating conditions and unit-to-unit manufacturing variances. As a result, typical fixed-threshold-alert systems do not detect problems until after a failure occurs.

Likewise, traditional condition-monitoring and predictive maintenance tools, such as vibration analysis, oil analysis, and thermography, are limited because of the difficulty in accessing the typical wind-turbine nacelle, the variable nature of the machine, and the time limitations and analytic capabilities of the technicians using them.

Ideally, equipment maintenance should only be performed when something needs fixing. Most preventive maintenance works on the idea of regularly inspecting or servicing equipment to address potential failures before they progress. However, given the huge variations in operating profile and environment, it’s easy to see that the regular, fixed inspection interval of traditional preventive maintenance may not catch critical emerging problems in the wind environment.

The conventional power industry, however, leads the industrial world in predicting impending equipment problems before they occur. And it is doing so using a technique directly applicable to the wind industry. In fact, several wind companies, Invenergy in Chicago for one, already uses the technology to get early warnings, avoid surprises, and improve control of their operations. The industry reduces risk exposed by existing condition-monitoring tools by leveraging its SCADA data to remotely detect emerging problems in a method is called predictive analytics.

Briefly, the technology precisely identifies impending problems by detecting subtle changes in equipment operation. It has found problems earlier than OEMs’ alerting systems or other condition monitoring approaches, and well within traditional alarm limits.

The Availability and Performance Center at SmartSignal’s headquarters near Chicago use predictive analytics to monitor a range of plants and equipment, wind farms among them. Invenergy’s U.S. fleet of 975 GE 1.5 MW turbines are monitored this way.

A predictive analytics primer

It’s a real-time system that works by analyzing SCADA data once every 5 to 10 minutes. The data for a turbine includes its power output, wind speed, rotor rpm, lube temperatures, and so on. Predictive analytics compares real-time data to a software model of equipment when operation in good condition, and compensates for normal variations due to load and ambient conditions. Further, the method uses software models customized for individual pieces of equipment to provide the earliest possible warning of emerging problems. It readily integrates with an existing data infrastructure and it’s quick and easy to deploy, maintain, and use.

The method needs no new sensor and analysts need not review masses of SCADA data. Instead, the software analyzes data and alerts analysts only when it detects an exception, providing ample time to plan and respond. And, by using algorithms to identify pattern changes, the analysis is highly accurate.

For wind applications, the software uses models customized for each individual turbine, which considers for fluctuations in wind speed, direction, and ambient conditions. In real time, the software compares data collected in the nacelle to the model–literally tens of thousands of data points every 5 to10 minutes across a fleet–and notifies maintenance and engineering of impending problems. Owners then focus on fixing problems early, before catastrophic damage occurs.

Take a gearbox for example. During the initial system configuration, a gearbox model would be “trained” using representative data provided from a data historian such as OSI PI (a data historian is a database for storing time-series data from instrumentation). Typically, one year of data would be used to train the model. In live operation, data from relevant sensors on the gearbox, such as for vibration and temperatures, along with operational state information, such as power output and ambient temperature, would be compared to the model. It would then provide an “estimate” of what each value such be, based on how it was trained from the historical data. If the actual value statistically differs from the model estimate, the system generates an alert. Technicians would review the sensors in alert and develop a preliminary diagnosis of the problem. A next step would typically be further on-machine investigation or use of other techniques, such as oil sampling.

Best practices

Given the high capital intensity of the wind-power business, reliable, long-term operation of the equipment is critical for generating positive returns and continued industry growth. It won’t take many major equipment failures before the long-term profitability of a farm is lost. As assets age, performing major work only when needed will be critical to maintaining economic viability.

Remote monitoring and condition-based maintenance approaches will be required to maintain financial returns because wind turbines are hard to access and don’t receive the same “walk-around” monitoring typical of industrial plants. Although wind has unique characteristics, wind turbines are just another kind of machine and successful operators will take advantage of best practices from other industries to outstrip their competition.

Source..Windpower Engineering